5 x 5" Vehicle to 5 x 5.5" Wheel Applications
Custom Wheel Accessories does it's best to provide as much information as possible to help with the applications of Wheel Adapters. It is, however, the user's responsibility to verify all information for their vehicles.
Hub Studs CANNOT protrude outside the face of the adapter. This will prevent the wheel from sitting FLUSH to the face of the adapter.
The installer assumes all responsibility to ensure the spacers are installed properly using the appropriate hardware.
The spacers are shipped with matching open end lugs on the studs, these would be used to bolt the spacer to the vehicle if the thread size is correct for the vehicle. Only approved lug nuts can be used to bolt the Spacer to the vehicle, factory lug nuts cannot be used.
5 x 5" to 5 x 5.5"
-
5135/5500-5550C - 12mm 1.50 / 1.5" Thick / 87.1mm CB
Learn More
Dual Drill Adapter
Vehicle: 5 x 135mm or 5 x 5" (127mm)
Wheel: 5 x 5.5" (139.7mm)
C = 1.50" Thickness -
5500/5550-5550C - 1/2" / 1.5" Thick / 87.1mm CB
Learn More
Dual Drill Adapter
Vehicle: 5 x 5" (127mm) or 5 x 5.5" (139.7mm)
Wheel: 5 x 5.5" (139.7mm)
C = 1.50" Thickness
1/2"-20 studs
